Conductive Silicone Adhesives
Conductive silicone adhesives are one component, room temperature curing adhesives that are flexible and conformable to suit applications where two dissimilar materials are required to be bonded, and electrically connected, with a reduced chance of the adhesive bond line cracking. For example the bonding of a polycarbonate or glass window into a metal bezel. The conductive silicone adhesive would securely fix the window in place, but be able to flex and bend, expand and contract while maintaining a secure bond and electrically conductive seal.
Our flexible conductive silicone adhesives are also very resistant to vibration, shock and extremes of temperature (thermal shock) whilst providing a high level of environmental sealing.
Our conductive adhesive remains flexible and conductive in environments where temperatures range from -55°C to 160°C without degradation of physical or electrical properties.
Our conductive silicone adhesives are available with Silver Aluminium, Silver Copper and Nickel Graphite fillers to best suit your application and reduce galvanic corrosion.
Key Properties
- Single component – ready to use
- Room temperature cure
- Neutral cure – does not evolve corrosive by-products on curing
- Safe for use with most common substrates – non tarnishing / discolouring
- Excellent resistance to ageing
- Wide service temperature range – remains flexible and conductive at extremes of temperature
- Stable – low bond (joint) resistance through temperature cycling
- Based on a range of conductive fillers to suit the electrical and environmental requirements of most applications
Available Conductive Silicone Adhesive Materials
Silver Aluminium | Silver Copper | Nickel Graphite | |
---|---|---|---|
Part Number | CA-SA | CA-SC | CA-NC |
Colour | Tan | Tan | Dark Grey |
Cure time before handling | 12 hrs | 12 hrs | 12 hrs |
Full Cure | 96 hrs | 96 hrs | 96 hrs |
Density | 2.1 gcm-3 | 3.3 gcm-3 | 2.1 gcm-3 |
Hardness | 65 Shore A | 65 Shore A | 75 Shore A |
Adhesion – lap shear (aluminium to aluminium) | 150 Ncm-2 | 150 Ncm-2 | 150 Ncm-2 |
Temperature range | -55°C to 160°C | -55°C to 160°C | -55°C to 160°C |
Bond resistance (aluminium to aluminium) | <20mΩ cm-2 | <10mΩ cm-2 | <10mΩ cm-2 |
Thermal conductivity | 0.8 Wm-1K-1 | 1.2 Wm-1K-1 | 1.0 Wm-1K-1 |
Recommended bond thickness | 0.05 – 0.5mm | 0.05 – 0.5mm | 0.05 – 0.5mm |
Recommended substrates | Aluminium Alloys | Copper Alloys | Plated materials |
To specify the type and size of conductive silicone adhesive required, please use the material code plus the container size as a suffix. For example for a 10cc syringe of Nickel Graphite material, the part number would be “CA-NC-10”
These materials are available in 10cc, 30cc, 55cc, 70cc, 170cc and 310cc cartridges
More information on Silicones can be found here
For more information, please Contact Us